스카니아 DPF

Scania Diesel Particulate Filter (DPF) Technical Parameters

매개변수
일반적인 값/범위
설명

적용 가능한 모델
Scania R-Series, G-Series, P-Series, S-Series
Compatible with a wide range of Scania trucks and buses across multiple production years.

배출 기준
유로 4 / 유로 5 / 유로 6
Compliant with European emission regulations, depending on model and engine type.

재료
코디라이트 / 탄화규소 / 스테인리스 스틸
High thermal and mechanical durability, suitable for long-term use in heavy-duty applications.

길이
~600-1200 mm
Varies according to engine size, exhaust layout, and soot storage requirements.

지름
~200-400mm
Outer diameter depends on model and emission load.

무게
12-35kg
Depending on substrate type, DPF size, and housing.

세포 밀도(CPSI)
200 / 300 / 400 / 600
Higher CPSI increases filtration efficiency but may slightly increase backpressure.

역압(클린)
2-10 kPa
Typical pressure drop across a clean DPF.

배압(로드됨)
최대 25kPa
Indicates soot accumulation; triggers regeneration cycle.

필터링 효율성
≥ 95%
Removes 95% or more of particulate matter under normal operating conditions.

작동 온도 범위
200-600 °C
Normal operating range for soot trapping and regeneration; can exceed during active regeneration.

재생 유형
패시브 및 액티브
Engine-controlled regeneration burns accumulated soot to restore filter efficiency.

OE 부품 번호
1781732, 1875758, 1879758…
Typical OEM part numbers for Scania DPFs.

의사 결정권자를 위한 참고 사항

모델 및 배출 기준 일치: Always verify that the DPF matches the Scania truck or bus model and corresponding Euro standard.

재료 선택: Cordierite is standard for regular operation; Silicon Carbide or Stainless Steel substrates are recommended for heavy-duty, high-temperature scenarios.

여과 효율 대 역압: Higher CPSI values improve PM capture but may increase backpressure, affecting fuel economy and regeneration cycles.

재생 전략: Automatic or ECU-controlled regeneration helps maintain optimal performance and prolong filter life.

OEM/ODM 서비스
We provide tailored OEM and ODM solutions for Scania DPFs, including custom dimensions, substrate materials, and branding options, supporting fleet operators, distributors, and engine manufacturers with bulk or customized solutions.